 |
 |
GEOPROBE 6620DT
Country Manufactured: United States
Specifications: Heavy duty direct push probing rig, with Cone Penetration Testing (CPT), Automatic SPT drop hammer, and Hollow Stem Auger options. Rubber track mounted.
Areas of use: Geotechnical and Environmental.
|
 |
|
Cone Penetration Testing (CPT)
Country Manufactured: Sweden
Specifications: The Geotech AB CPT system is a cordless CPT with real time data acquisition. The high resolution data is transmitted using sound waves which travel through the steel probe rods. Probes include both 50MPa and 100MPa. Complete with CPT interpretative software which is able to provide information on soil types, SPT values, soil friction angles, relative density and other correlations if required.
|
|
|
GEOPROBE 7720DT
Country Manufactured: United States
Specifications: Heavy duty direct push probing rig, with Membrane Interface Probe (MIP), Electrical Conductivity, Automatic SPT drop hammer, and Hollow Stem Auger options. Rubber track mounted.
Areas of use: Geotechnical and Environmental.
Download Geoprobe Brochure (1.4MB PDF)
|
 |
|
Membrane Interface Probe (MIP)
Country Manufactured: United States
Specifications: The Membrane Interface Probe (MIP) is a screening tool with semi-quantitative capabilities acting as an interface between the contaminates in the subsurface and gas phase detectors at the surface.
Areas of use:In situ detection of volatile organic compounds (VOCs) in the subsurface.
Download MIP Brochure (700KB PDF)
|
 |
|
INGERSOLL RAND TH60
Country Manufactured:
United States
Specifications:
Heavy-duty, hydraulic top head drive, sliding angle mast, hydraulic drill pipe clamp, and hydraulic drill pipe break out rotating drill pipe carrousel in mast, 5x8 mud pump and 750cfm x 300psi air compressor. 8x4 truck mounted.
Areas of use:
Large capacity rock Drilling Rig, high pressure air drilling including Reverse Circulation and mud rotary drilling.
|
 |
|
UDR 650 MK11
Country Manufactured:
Australia
Specifications:
Medium to heavy-duty, multi speed hydraulic top head drive, sliding angle mast, hydraulic drill pipe clamp, hydraulic drill pipe break out, high pressure/volume triplex coring pump, 5x6 mud pump or on board 800cfm x 250psi air compressor. 8x4 truck mounted, 6x6 ATV carrier mounted, or Steel track carrier mounted.
Areas of use:
General drilling, Water Bores, Production Wireline Coring, Geotechnical & Environmental investigation.
|
 |
|
GEFCO 1250
Country Manufactured:
United States
Specifications:
Medium-duty mud rotary drilling rig, kelly drive, 5x6 mud pump. Truck mounted.
Areas of use:
General Drilling, Water Bores, Exploration and Seismic.
|
 |
|
SIMCO 5000 TR3
Country Manufactured:
United States
Specifications:
Medium-duty drilling rig, multi speed hydraulic top head drive, sliding angle mast, hydraulic drill pipe clamp, and hydraulic drill pipe break out, high pressure/volume triplex coring pump. Cat D3 rubber or steel track mounted.
Areas of use:
Production Wireline Coring, Geotechnical and Environmental investigation.
|
 |
|
SIMCO 5000
Country Manufactured:
United States
Specifications:
Medium-duty drilling rig, multi speed hydraulic top head drive, hydraulic drill pipe clamp, hydraulic drill pipe break out, high pressure/volume triplex coring pump, 5x6 mud pump or on board 800cfm x 250psi air compressor. 8x4 truck mounted, 6x6 ATV carrier mounted, or steel track carrier mounted.
Areas of use:
General drilling, Water Bores, Production Wireline Coring, Geotechnical and Environmental investigation.
|
 |
|
ATLAS COPCO
Country Manufactured:
Sweden
Specifications:
Light to medium-duty hydraulic top head drive, hydraulic foot clamps, coring pump, sliding angle mast. Rubber or steel track mounted.
Areas of use:
Horizontal and angle drilling rig.
|
 |
|
GEMCO
Country Manufactured:
Australia
Specifications:
Light-duty, high and low speed hydraulic top head drive, hydraulic drill rod clamp, coring pump. 4x4 Ute mounted.
Areas of use:
Geotechnical & Environmental investigation.
|
